CodyDoby 大佬有话说 :
怎么查看服务器硬盘用了多久了
试了下，怎么老报错
root@PAR-258395:/# sudo apt-get install smartmontools && sudo smartctl –all /dev/sda3
Reading package lists… Done
Building dependency tree
Reading state information… Done
smartmontools is already the newest version (6.6-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
smartctl 6.6 2017-11-05 r4594 (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: Dell
Product: Virtual Disk
Revision: 1028
Compliance: SPC-4
User Capacity: 1,999,307,276,288 bytes
Logical block size: 512 bytes
Logical Unit id: 0x600508e0000000007e225ea7781d6100
Device type: disk
Local Time is: Mon Jan 11 14:18:50 2021 CET
SMART support is: Unavailable – device lacks SMART capability.
=== START OF READ SMART DATA SECTION ===
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Error Counter logging not supported
Device does not support Self Test logging
clf42 大佬有话说 :
自己看看挂载的盘名
remarkable 大佬有话说 :
你得看你独服硬盘挂载的盘名，用fdisk -l看一下，然后再smartctl -A /dev/***
tomcb 大佬有话说 :
Product: Virtual Disk
yc022t
CodyDoby 大佬有话说 :
remarkable 大佬有话说 : 2021-1-11 21:31
你得看你独服硬盘挂载的盘名，用fdisk -l看一下，然后再smartctl -A /dev/***
应该没错哦
root@PAR-258395:/# sudo fdisk -l
Disk /dev/sda: 1.8 TiB, 1999307276288 bytes, 3904897024 sectors
Disk model: Virtual Disk
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x77a7ac8c
Device Boot Start End SectorsSize Id Type
/dev/sda1* 2048 1048575 1046528511M 83 Linux
/dev/sda2 1048576 3196927 2148352 1G 82 Linux swap / Solaris
/dev/sda3 3196928 3904894975 39016980481.8T 83 Linux
CodyDoby 大佬有话说 :
tomcb 大佬有话说 : 2021-1-11 21:31
这就不懂了，这是OneProvider的独立服务器
matoi 大佬有话说 :
试试
smartctl -d sat /dev/sda3
remarkable 大佬有话说 :
CodyDoby 大佬有话说 : 2021-1-11 22:07
应该没错哦
你这直接smartctl -A /dev/sda就可以了
tomcb 大佬有话说 :
CodyDoby 大佬有话说 : 2021-1-11 22:07
应该没错哦
你这物理盘是/dev/sda，下面123是分的区。
CodyDoby 大佬有话说 :
matoi 大佬有话说 : 2021-1-11 22:10
试试
好像也不行，是这样操作的吗
oot@PAR-258395:/# smartctl -d sat /dev/sda3
smartctl 6.6 2017-11-05 r4594 (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
ATA device successfully opened
Use ‘smartctl -a’ (or ‘-x’) to print SMART (and more) information
root@PAR-258395:/# smartctl -d sat -a /dev/sda3
smartctl 6.6 2017-11-05 r4594 (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error badly formed scsi parameters
A mandatory SMART command failed: exiting. To continue, add one or more ‘-T permissive’ options.
root@PAR-258395:/# smartctl -d sat -a /dev/sda3 -T permissive
smartctl 6.6 2017-11-05 r4594 (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error badly formed scsi parameters
=== START OF INFORMATION SECTION ===
Device Model:
Serial Number:
Firmware Version:
Device is: Not in smartctl database
ATA Version is:
Local Time is: Mon Jan 11 15:34:42 2021 CET
SMART support is: Ambiguous – ATA IDENTIFY DEVICE words 82-83 don’t show if SMART supported.
SMART support is: Ambiguous – ATA IDENTIFY DEVICE words 85-87 don’t show if SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more ‘-T permissive’ options.