跳至主要內容
  • Hostloc 空間訪問刷分
  • 售賣場
  • 廣告位
  • 賣站?

4563博客

全新的繁體中文 WordPress 網站
  • 首頁
  • 硬盘变read only,三秒警报一声,这是要挂了吗?
未分類
4 7 月 2020

硬盘变read only,三秒警报一声,这是要挂了吗?

hostsb 大佬有话说 :

硬盘变read only,三秒警报一声,这是要挂了吗?

本帖最后由 hostsb 于 2020-7-4 07:23 编辑

有时重启fdisk -l也看不到,这是要挂了还是连接线材有问题啊?

smart看不懂
smartctl 6.6 2017-11-05 r4594 (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke,

=== START OF INFORMATION SECTION ===
Device Model:   ST1000LM035-1RK172
Serial Number:    WC01WXVX
LU WWN Device Id: 5 000c50 0b9b7c4ea
Firmware Version: SBM3
User Capacity:    1,000,204,886,016 bytes Sector Sizes:   512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:      Not in smartctl database
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Sat Jul4 07:16:01 2020 CST
SMART support is: Available – device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:(0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (    0) seconds.
Offline data collection
capabilities:                  (0x71) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:      (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 170) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x3035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG   VALUE WORST THRESH TYPE      UPDATEDWHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate   0x000f   083   064   006    Pre-failAlways       –       179623546
3 Spin_Up_Time            0x0003   100   097   000    Pre-failAlways       –       0
4 Start_Stop_Count      0x0032   098   098   020    Old_age   Always       –       2751
5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-failAlways       –       0
7 Seek_Error_Rate         0x000f   084   060   045    Pre-failAlways       –       247098139
9 Power_On_Hours          0x0032   081   081   000    Old_age   Always       –       16734 (147 71 0)
10 Spin_Retry_Count      0x0013   100   100   097    Pre-failAlways       –       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       –       498
184 End-to-End_Error      0x0032   100   100   099    Old_age   Always       –       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       –       0
188 Command_Timeout         0x0032   100   001   000    Old_age   Always       –       2030
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       –       0
190 Airflow_Temperature_Cel 0x0022   063   047   040    Old_age   Always       –       37 (Min/Max 37/37)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       –       2
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       –       1226
193 Load_Cycle_Count      0x0032   065   065   000    Old_age   Always       –       71861
194 Temperature_Celsius   0x0022   037   053   000    Old_age   Always       –       37 (0 11 0 0 0)197 Current_Pending_Sector0x0012   100   100   000    Old_age   Always       –       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      –       0
199 UDMA_CRC_Error_Count    0x003e   200   198   000    Old_age   Always       –       2790
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      –       14803 (4 61 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      –       18175756918
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      –       62832315885
254 Free_Fall_Sensor      0x0032   100   100   000    Old_age   Always       –       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
NumTest_Description    Status                  RemainingLifeTime(hours)LBA_of_first_error
# 1Short offline       Completed without error       00%   14772         –
# 2Short offline       Completed without error       00%   14076         –
# 3Short offline       Completed without error       00%   13341         –
# 4Short offline       Completed without error       00%   12597         –
# 5Short offline       Completed without error       00%   11882         –
# 6Short offline       Completed without error       00%   11182         –
# 7Short offline       Completed without error       00%   10462         –
# 8Short offline       Completed without error       00%      9718         –
# 9Short offline       Completed without error       00%      8976         –
#10Short offline       Completed without error       00%      8256         –
#11Short offline       Completed without error       00%      7513         –

SMART Selective self-test log data structure revision number 1
SPANMIN_LBAMAX_LBACURRENT_TEST_STATUS
    1      0      0Not_testing
    2      0      0Not_testing
    3      0      0Not_testing
    4      0      0Not_testing
    5      0      0Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

bjrjk 大佬有话说 :

肯定是要挂了呗,还不赶紧把数据拷出来

寒夜方舟 大佬有话说 :

报警了,基本上要挂

jzl 大佬有话说 :

快了,赶紧拷数据吧

wlz 大佬有话说 :

烤数据,格式化一次就凉了

文章導覽

上一篇文章
下一篇文章

AD

其他操作

  • 登入
  • 訂閱網站內容的資訊提供
  • 訂閱留言的資訊提供
  • WordPress.org 台灣繁體中文

51la

4563博客

全新的繁體中文 WordPress 網站
返回頂端
本站採用 WordPress 建置 | 佈景主題採用 GretaThemes 所設計的 Memory
4563博客
  • Hostloc 空間訪問刷分
  • 售賣場
  • 廣告位
  • 賣站?
在這裡新增小工具