1、请选择系统centos7.

2、安装KVM,

yum -y install qemu-kvm libvirt virt-install bridge-utils bind-utils virt-manager wget net-tools virt-viewer genisoimage epel-release

开机启动libvirtd

systemctl start libvirtd

systemctl enable libvirtd

3、组网禁防火墙:

# 网卡配置,新建ifcfg-bro,然后修改相关配置如下:

[[email protected] ~]# cd /etc/sysconfig/network-scripts/

[[email protected] network-scripts]# cat ifcfg-br0

DEVICE=”br0″

ONBOOT=”yes”

TYPE=”Bridge”

BOOTPROTO=static

IPADDR=192.168.1.110   # 自定义

NETMASK=255.255.255.0

GATEWAY=192.168.1.1

DEFROUTE=yes

 

# ifcfg-bond0配置文件修改

[[email protected] network-scripts]# cat ifcfg-bond0

DEVICE=bond0

TYPE=Ethernet

NAME=bond0

BONDING_MASTER=yes

BOOTPROTO=none

BRIDGE=br0

ONBOOT=yes

BONDING_OPTS=”mode=5 miimon=100″

重启网络:

systemctl restart network

4、重点来了,安装kimchi。
项目地址:https://github.com/kimchi-project/kimchi

打开ip:8001
先创建模板,再创建虚拟机。VNC安装。

最后上图:

來源:cnly1987

advertising
Blogger簡易教程VPS,獨服開vps
1、请选择系统centos7. 2、安装KVM, yum -y install qemu-kvm libvirt virt-install bridge-utils bind-utils virt-manager wget net-tools virt-viewer genisoimage epel-release 开机启动libvirtd systemctl start libvirtd systemctl enable libvirtd 3、组网禁防火墙: # 网卡配置,新建ifcfg-bro,然后修改相关配置如下: # cd /etc/sysconfig/network-scripts/ # cat ifcfg-br0 DEVICE='br0' ONBOOT='yes' TYPE='Bridge' BOOTPROTO=static IPADDR=192.168.1.110   # 自定义 NETMASK=255.255.255.0 GATEWAY=192.168.1.1 DEFROUTE=yes   # ifcfg-bond0配置文件修改 # cat ifcfg-bond0 DEVICE=bond0 TYPE=Ethernet NAME=bond0 BONDING_MASTER=yes BOOTPROTO=none BRIDGE=br0 ONBOOT=yes BONDING_OPTS='mode=5 miimon=100' 重启网络: systemctl restart network 4、重点来了,安装kimchi。 项目地址:https://github.com/kimchi-project/kimchi   cd /tmp wget https://github.com/kimchi-project/kimchi/releases/download/2.5.0/kimchi-2.5.0-0.el7.centos.noarch.rpm wget https://github.com/kimchi-project/kimchi/releases/download/2.5.0/wok-2.5.0-0.el7.centos.noarch.rpm yum -y install kimchi-2.5.0-0.el7.centos.noarch.rpm wok-2.5.0-0.el7.centos.noarch.rpm 然后重启reboot   打开ip:8001 先创建模板,再创建虚拟机。VNC安装。 最后上图: 來源:cnly1987